Top Notifier Modules Supplier | FRM-1, FCM-1 & FMM-1
To build a truly intelligent fire alarm system, you need flawless communication between the control panel and your field devices. As a premier Notifier modules supplier, Shabh Creations Pvt. Ltd. provides the exact hardware required to monitor sprinkler flow switches, interface with conventional zones, or control elevator recall.
We specialize in comprehensive input and output solutions, helping contractors and facility managers securely bridge their life safety networks. When you partner with a certified Notifier modules supplier, you are guaranteed authentic equipment, competitive pricing, and expert technical backing.
Notifier Monitor Modules (Inputs) Explained by Notifier Modules Supplier
Monitor modules act as the “eyes” of your fire alarm system, interfacing with contact devices like waterflow switches, manual pull stations, and tamper switches.
FMM-1 & FMM-101 Monitor Modules
As a leading distributor, we offer the best Notifier monitor module FMM-1 price for your commercial projects. The FMM-1 is the standard for monitoring a circuit of dry-contact input devices.
For installations where space is restricted (such as mounting inside a single-gang box behind a pull station), we supply the Notifier mini monitor module FMM-101, which provides the exact same intelligent monitoring in a compact, pigtail-style footprint.
Notifier Control & Relay Modules (Outputs)
When your fire panel detects an alarm, it must trigger auxiliary functions—such as shutting down HVAC systems, closing fire doors, or activating notification appliances.
FRM-1 Relay Module
We are your dedicated Notifier control relay module FRM-1 supplier. The FRM-1 provides the system with a dry-contact output for activating a variety of auxiliary devices, giving your panel complete control over emergency building functions.
FCM-1 Control Module
As an authorized Notifier FCM-1 control module dealer, we supply these essential units designed to route and monitor power to notification appliance circuits (like horns and strobes) or to control telephone systems. The FCM-1 ensures your evacuation signals activate flawlessly during an emergency.
Notifier Fault Isolator Modules (Loop Protection)
A robust fire alarm system must be resilient. If a wire-to-wire short circuit occurs on your Signaling Line Circuit (SLC) loop, it could potentially take down all devices on that loop.
ISO-X Fault Isolator Module
We supply the Notifier ISO-X fault isolator to ensure your system’s maximum survivability. The ISO-X automatically opens the circuit when a short is detected, isolating the fault and allowing the rest of the network to continue operating normally. Once the short is fixed, the ISO-X automatically resets itself.
Get a Project Quote Today
Are you searching for a reliable Notifier modules supplier to fulfill your project requirements? Shabh Creations delivers authentic Notifier hardware nationwide. Contact our team today with your project’s Bill of Quantities (BOQ) to check inventory availability and request a highly competitive quote.
Frequently Asked Questions (FAQs)
What is the difference between the FMM-1 monitor module and the FCM-1 control module?
The FMM-1 is an input module used to monitor the status of external devices (like a waterflow switch) and report that status to the fire panel. The FCM-1 is an output module used by the panel to switch power to notification devices (like sirens or strobes) during an alarm.
Where should I use the Notifier mini monitor module FMM-101?
The FMM-101 operates exactly like the standard FMM-1 but is much smaller. It is designed to be installed in tight spaces, such as directly inside the electrical box behind a manual pull station or a tamper switch.
Can the FRM-1 relay module handle high voltage?
The FRM-1 provides two isolated sets of Form-C contacts. It is typically rated to handle standard auxiliary loads (like 30VDC or up to 120VAC at limited amperage). Always check the exact voltage and amperage requirements of the HVAC fan or door holder you are trying to control to ensure it falls within the module’s rating.
When is a fault isolator module (ISO-X) required?
Fault isolator modules are typically required by local fire codes for large systems to ensure that a single short circuit doesn’t disable an entire floor or building zone. They are strategically placed between groups of devices on the SLC loop. Once the short is fixed, the ISO-X automatically resets itself without manual intervention.
Do you supply these modules in bulk for large installations?
Yes. We regularly support MEP contractors, system integrators, and facility managers with wholesale pricing for large-scale fit-outs. Share your building plans or BOQ for custom pricing.